LM-300 Low pressure injection machine
The side-type glue injection series give the molds of multi-cavity and slider mechanism more space for use, and are suitable for injecting and encapsulating products with various low-pressure hot melt molding resins. The process pressure is low (0-6MPa), it will not damage the parts, there is no chemical reaction, the molding is fast, cooling is the molding, and the molded product has the properties of insulation and waterproof. is widely used in the packaging and protection of precision and sensitive electronic components such as batteries, sensors, coils, wiring harnesses, connectors, PCBA, etc.
•Machine and the glue melting system occupies a small space.
•The glue injection speed can be adjusted through the panel, and the glue injection Control is more precise.
•System adopts modular design,convenient and quick to repair and maintain。
•Self-diagnosis function and various fault alarms。
•The temperature of the glue tank and glue gun controlled independently。
•Over temperature alarm and automatic heating stop function。
•The position of the glue gun can be quickly adjusted , can easy to change the mold。
•The New gear pump and glue gun, compact structure, stable glue injection,low failure rate。
•Glue melting fast.short waiting time。
•Two-hand operation and safety sensor can protect the safety of operators。
•Equipped with product discharge cylinder, easy to take out the finished product。
•HMI can store multiple material parameters (temperature / injection speed /mold open time / mold withdrawal time)
•Automatic feeding system and multi-stage glue injection pressure control system。
•Double-station single-gun side glue injection, giving more complex molds with multiple cavity and slider mechanisms more application space。
•Double glue cylinder and injection system
•Pressurized cylinder clamping module system。
•Mobile work table, (one die upper for two bottom die) improves production efficiency。
•Mold cooling system。
| Machine Size / weight | W900Xl850xH1765(mm) 470kg |
| Space requirement | 2.5M² |
| Height of working table | 860mm |
| Melt glue system | Melt glue tank x 1 heating block x 1 nozzle x 1 |
| Auto feeding system | Option |
| Maximum injection glued | 10g /RPM |
| Nozzle angle | 30 degrees (standard) other angles can be customized |
| Input volt | 200-240VAC / 1 Phase / 60 Hz/30A |
| Temperature control zone | glue tank /nozzle |
| Temperature range | 25℃---200℃ |
| power | 3.5kw |
| Air presure | 5kg/cm2 |
| close mold method | Cylinder |
| close mold power | 1000kg(5kg/cm2) |
| close mold stroke | 175mm |
| Demould method | Cylinder |
| Demould power | 40kg(5kg/cm2) |
| Demould stroke | 30mm |
| Control System | Plc+HMI |
| Safety protection | Grating, rear protective cover |
| Standard mold size | 180 mm x 100 mm x 150 mm / 16 kg |
| Maximum mold size | 250 mm x 120 mm x 150 mm |
LM300 Maximum mold size
LM300 Machine size and layout
