The side-type glue injection series give the molds of multi-cavity and slider mechanism more space for use, and are suitable for injecting and encapsulating products with various low-pressure hot melt molding resins.　The process pressure is low (0-6MPa), it will not damage the parts, there is no chemical reaction, the molding is fast, cooling is the molding, and the molded product has the properties of insulation and waterproof. is widely used in the packaging and protection of precision and sensitive electronic components such as batteries, sensors, coils, wiring harnesses, connectors, PCBA, etc.

•Machine and the glue melting system occupies a small space.
•The glue injection speed can be adjusted through the panel, and the glue injection Control is more precise.
•System adopts modular design,convenient and quick to repair and maintain。
•Self-diagnosis function and various fault alarms。
•The temperature of the glue tank and glue gun controlled independently。
•Over temperature alarm and automatic heating stop function。
•The position of the glue gun can be quickly adjusted , can easy to change the mold。
•The New gear pump and glue gun, compact structure, stable glue injection,low failure rate。
•Glue melting fast.short waiting time。
•Two-hand operation and safety sensor can protect the safety of operators。
•Equipped with product discharge cylinder, easy to take out the finished product。
•HMI can store multiple material parameters (temperature / injection speed /mold open time / mold withdrawal time)

•Automatic feeding system and multi-stage glue injection pressure control system。
•Double-station single-gun side glue injection, giving more complex molds with multiple cavity and slider mechanisms more application space。
•Double glue cylinder and injection system
•Pressurized cylinder clamping module system。
•Mobile work table, (one die upper for two bottom die) improves production efficiency。
•Mold cooling system。

• Machine Size / weight	W900Xl850xH1765(mm)   470kg
  Space requirement	2.5M²
  Height of working table	860mm
  Melt glue system	Melt glue tank x 1 heating block x 1 nozzle x 1
  Auto feeding system	Option
  Maximum injection glued	10g /RPM
  Nozzle angle	30 degrees (standard) other angles can be customized
  Input volt	200-240VAC / 1 Phase / 60 Hz/30A
  Temperature control zone	glue tank /nozzle
  Temperature range	25℃---200℃
  power	3.5kw
  Air presure	5kg/cm2
  close mold method	Cylinder
  close mold power	1000kg(5kg/cm2)
  close mold stroke	175mm
  Demould method	Cylinder
  Demould power	40kg(5kg/cm2)
  Demould stroke	30mm
  Control System	Plc+HMI
  Safety protection	Grating, rear protective cover
  Standard mold size	180 mm x 100 mm x 150 mm / 16 kg
  Maximum mold size	250 mm x 120 mm x 150 mm

  LM300 Maximum mold size
  
  
  LM300 Machine size and layout